http://www.potsaa.com/setting-mint/
As parts precatice generally an identification mark indicating the mint where it was struck. These instruments are called as a mint mark. This practice seems to be quite old – parts of the Roman and Greek civilizations show also marks.
In the United States, the mintmark were stamped on the reverse side of the room until 1965, however, after 1967, they got shifted to the front. In Given the mint mark, we can say where they are "manufactured".
The rules for classifying and differentiating the parts produced in different currencies of the United States is determined by the Director of the Mint through March 3, 1835 Act. He is also responsible for setting standards of quality and quantity production of parts in the United States.
Mint marks were presented at the Philadelphia Mint in the year 1979 for parts one dollar, the earlier pieces from here do not bear the mint mark. Later, the marks have been introduced to other parts too little value.
The mint marks are placed on the hard parts before they are transferred to produce parts finished at designated areas mint. The exact location of the notes of mint may vary slightly depending on the strength and location of the punch.
Utility mint marks
You can judge the value of a coin, looking at the condition of the mint mark with other factors. Another important use of mint marks, that they determine the location (Mint) where the part originated. Sometimes, it can also be a factor in determining the value of the coin.
The minting process
1. Preparation of the metal strip with a thickness correct: for pennies, strip of zinc is used in alloy strip is used for one dollar coins, half dollar, dime and nickel. Half dimes were made by coating a thin strip of copper alloy on both sides – a sort of sandwich of copper.
2. Prepare blanks Round: The strips are cut into round discs, about the size of finished parts
3. Soften the blank rounds: The white circles are softened and cleaned by exposing them to higher temperatures in an annealing oven, put them in tumbling barrels and finally moving cylinders containing certain chemicals.
4 Pull the brim: After washing the whites are dry and fed to a machine to overturn raised rims.
5. Making room: Finally, the finished parts are manufactured by inserting in the white collar prison and strike with high pressure. Pennies are pressed with a pressure of about 40 tons. Higher pressure is needed for larger rooms. Both sides of the blanks are stamped along the upper and lower dies.
Design of U.S. coins
The design of U.S. coins is chosen by the Director of the Mint, followed by approval of the Secretary of the Treasury. U.S. Congress may also suggest or recommend a design. Once approved, the design of parts can not change for the next 25 years unless Congress approves.
Currently, all U.S. coins offer former presidents of the country, p. ex., the one-cent coins is the president since Lincoln 1909, five pennies since 1938 feature Jefferson, Franklin Roosevelt was introduced to the tithe in 1946, half dollars Kennedy hit show first in 1964 on the Washington quarter dollar coins since 1932.
The "Fifty States Quarters Program" or "1997 Act" allows the quarters to be redrawn. The back of the quarter dollar coin will feature the emblems of all states, one after another. During 1999 to 2008, each year, five states will be honored by the issuance of coins quarter with drawings created by them – the States – is chosen in the same sequence, they signed the constitution
"In God We Trust" was first been used on a coin of 2 cents in 1864. In 1866, he found his way on the nickel of the United States, quarter, half dollar, dollar and five, ten and twenty-one dollar coins. He went to the Penny in 1909 and on the dime in 1916. Now you can find this sentence on all U.S. coins.
About the Author:
Abhishek is an avid Coin Collecting enthusiast and he has got some great Coin Collecting Secrets up his sleeve! Download his FREE 58 Pages Ebook, “Understanding And Mastering The Art Of Coin Collecting!” from his website http://www.Fun-Galore.com/92/index.htm . Only limited Free Copies available.
Article Source: ArticlesBase.com – Minting Facts Revealed – Learn More About Minting Money
Kon Pi Set – Mint Ardhawadee Jiramaneekul.
